Abstract:
Jib cranes are widely used in industrial facilities
all over the world. A typical jib crane consists of a top beam
which is rotating around a fixed column. This configuration
may be referred to as an L-shaped structure. Current
material handling systems exhibit anisotropic beheviour.
That is, their two planar degrees of freedom require different
amounts of force input from the operator. Movement of
these devices is correspondingly difficult. One of the three
most prevalent material handling devices, the jib crane, is
selected for research into creating isotropic motion.
Deflection occurs of T-section as a span of Jib crane which
is mention in this project, to optimization of deflection to
increase modulus of elasticity. Analysis showed that a T-section will withstand large transverse deflection without in-plane ply failure; the predominant failure mechanism is
delaminating in the fillet region. Especially Jib Crane used
for circular material handling, it menace radial work
