Cuk converter base electrical vehicle charger by using PV Array

dc.contributor.author	Sosa, Hareshkumar
dc.date.accessioned	2024-03-04T10:35:25Z
dc.date.available	2024-03-04T10:35:25Z
dc.date.issued	2022
dc.identifier.citation	Sosa, H. (2022). Cuk converter base electrical vehicle charger by using PV Array. Department of Electrical Engineering Faculty of Engineering and Technology Atmiya University.	en_US
dc.identifier.uri	http://10.9.150.37:8080/dspace//handle/atmiyauni/1404
dc.description.abstract	This project represents the electrical vehicle charger. Which is consists of PV module with MPPT and DC-DC converter connected in cascaded form. Here DC-DC converter used is “INTERLEAVED CUK CONVERTER” due to its various advantages compare to conventional converters. The project takes irradiation from sun light from PV module which senses temperature change and irradiation and gives output according to input. After that this output is given to Battery for charging. Here, the analysis and the performance of the parameters are carried out by simulation in Matlab.	en_US
dc.language.iso	en	en_US
dc.subject	CUK Converter	en_US
dc.subject	PV Module	en_US
dc.subject	MPPT	en_US
dc.subject	Perturb and Observe (P&O)	en_US
dc.title	Cuk converter base electrical vehicle charger by using PV Array	en_US
dc.type	Thesis	en_US