05. Department of Mechanical Engineering: Recent submissions

  • Thermal Analysis of Casting using ANSYS: A Review 
    Lakum, P.; Gondaliya, R.; Jadeja, I. (Journal of Production Research & Management(STM Journals), 2016)
    The major requirement of any foundry is to provide the high quality casting products. Since the quality is depended upon thermal stress and solidification of the casting, a thermal analysis is a key area to work on. ...
  • Optimization of Gating System and Minimization of Casting Defect based on Casting Simulation: A Review 
    Bechara, Sagar; Mondloe, Dilbagsinh (IJSRD - International Journal for Scientific Research & Development, 2014)
    Investment casting process is a manufacturing process to make complex geometrical parts of metal materials in mass production. But many times different defect occurs such as shrinkage cavity or porosity. These defects ...
  • Enhancing the Surface Finish of Product Coming From High Precision CNC- Milling Center by Varying the Machine Parameters Through Taguchi Approach 
    Vangani, Niraj; Motwani, Komal (International Journal for Research in Applied Science & Engineering Technology (IJRASET), 2022-02)
    The manufacturing process for products with high degree of precision is very critical and hence increasing the surface quality, wherever possible has been the prime motive, so many leading companies are working with high ...
  • Design & Analysis of Fork Pin & Its Assembly in Hydraulic Cylinder 
    Vangani, Niraj; Mandaliya, Piyush (International Journal for Research in Technological Studies, 2014-12)
    The traditional fork pin which connects with the next part in hydraulic cylinder with the help of bolt and nut. But, main problem occurs, when motion is transferred through the existing pin, the nut could be loose ...
  • Design & Analysis of Fork pin & its Assembly in Pneumatic cylinder 
    Vangani, Niraj; Mandaliya, Piyush (International Journal of Advance Engineering and Research Development, 2015-05)
    The traditional fork pin connects the next part in hydraulic/pneumatic cylinder with the help of bolt and nut. But, main problem occurs, when motion is transferred through the existing pin, the nut could be loose due to ...
  • Component Fastening by Using Snap-On Tools Replacing Traditional Fasteners 
    Vangani, Niraj; Kagathara, Manhar (Trends in Mechanical Engineering & Technology (STM Journals), 2016)
    The traditional fasteners connect the next part in different assemblies with the help of bolt, nuts and other fasteners. But main problem starts when motion passes through the assemblies; it may make the assemblies weak ...
  • Simulation of a hot forging Process for 42CrMo4 Connecting rod in application of reduction in Unfilling 
    Thakkar, Lakhan; Chauhan, Hardik; Sheladiya, Manoj (IJARIIE, 2017)
    The objective of this paper is to find an optimum temperature range in which no unfilling is found in hot forging of connecting rod made of 42CrMo4. Connecting rod is one of the most important components in automobile. ...
  • A Review on “Optimization of Process Parameters for Honing Process of GG25 Cylinder Liner” 
    Joshi, Vatsal; Chauhan, Hardik; Sadatiya, Akash (Trends in Machine Design(STM Journals), 2017)
    Manufacturing processes play requisite role in the market and industries. Stipulation of manufacturing processes has increased now days. Optimization is very essential thing in manufacturing processes. Due to optimization ...
  • Casting Simulation using ProCast–A Review 
    Lakum, Parth; Chauhan, Hardik (Journal of Production Research & Management(STM Journals), 2016)
    Productivity improvement is the need of current market and manufacturing sector globally. In India the manufacturing sector is concentrated towards the casting process and majority of the products are manufactured by ...
  • Design of C-Frame for Assembly of Mechanical Power Press 
    Chauhan, H.; Vaghela, R.; Dudhatra, A. (Trends in Machine Design(STM Journals), 2016)
    The aim is to generate the model for assembly operation known as mechanical press machine. Using the concept of reverse engineering, the C-frame has been designed considering stress distribution, deflection, and design ...
  • Parametric Study of Cylindrical Grinding Machine-Review 
    Dudhatra, Amit; Chauhan, Hardik; Khilosia, Tushar (Journal of Materials & Metallurgical Engineering, STM Journals., 2015)
    Manufacturing industry has undergone various changes to meet the requirement of customers and to manufacture the components with accuracy and within time limit. For that, study of different parameters that directly or ...
  • Design and Modeling of Boring Fixture for Roller Stand 
    Der, Kamlesh; Chauhan, Hardik; Kavad, Bhupat (International Journal of Advance Engineering and Research Development (IJAERD), 2015-05)
    A Fixture is a device that must be able to position, hold support the work piece throughout machining operation. Generally used in mass and medium production.. This paper aims to provide sufficient condition to establish ...
  • A Review on Cost Optimization of Power Press by Analysis of C-Frame using Solid Works 
    Telwala, Mustafa; Parikh, Anand; Vaja, Hitesh; Dabhi, Hardikbhai; Vaghela, Rajdipsinh; Chauhan, Hardik (Journal of Emerging Technologies and Innovative Research (JETIR), 2015-11)
    Power press working is defined as chip less manufacturing process. We can also say as cold stamping process. The machine used for press working is known as press. Press has a frame, a bed or bolsters plate and a reciprocating ...
  • Design and Modelling of Boring Fixture for Roller Stand 
    Der, Kamlesh; Chauhan, Hardik (International Journal for Research in Technological Studies, 2014-11)
    A Fixture is a device that must be able to position, hold support the workpiece throughout machining operation. When number of parts to be machined is large, fixture provide time saving criterion to locate work for ...
  • FDM – Everything You Need to Know: A Review 
    Rathod, Himat; Makwana, Rishabh; Saradava, Biren; Acharya, G.D. (Trends in Mechanical Engineering & Technology (STM Journals), 2020)
    The full form of FDM is fused deposition modelling, it is often referred to as 3D printing, additive manufacturing is in truth an technology which has been around for in any event three decades. There are in reality ...
  • Minimization of Distortion During Gas Metal Arc Welding Process: A Review 
    Vyas, Shashin; Shah, Sagar (Journal of Experimental & Applied Mechanics (STM Journals), 2017)
    The gas metal arc welding (MIG) process is widely used in many appliances because of its versatility. For GMAW process, metals like carbon steel, stainless steel, aluminium, copper, low-alloy steel are widely used in ...
  • Comparison of PQR and WPQ for Jacket Long Seam Joint of Pressure Vessel as per ASME Section IX 
    Shah, Sagar; Shah, Jinesh (Journal of Materials & Metallurgical Engineering, STM Journals., 2016)
    Small and medium size stocked components intended for boiler and pressure vessel are often manufactured and welded with reference to ASME section III and IX. This paper mainly focuses on rules for welding qualification, ...
  • Improvement in Energy and Exergy Efficiency by Applying Thermal Insulation as per ASTM C680: A Review 
    Shah, Sagarkumar (Journal of Thermal Engineering and Application(STM Journals), 2016)
    Small and medium enterprises (SMEs) consume a lot of energy due to inefficient usage of energy which otherwise can be conserved by the usage of effective thermal insulations. In the present study, an Indian SME was ...
  • Minimization of Wet Bulb Temperature of Ambient Air for Improve Efficiency of Cooling Tower 
    Sonagra, Yagnesh; Hadiyal, Ashok; Shah, Sagar (International Journal of Engineering Development and Research, 2016)
    Now a days a efficiency is most important in cooling tower. In previous time cooling tower operated by heat transfer through a surface That separates the working fluid from ambient air, such as in a tube to air Heat ...
  • Effect of Geometry and Arrangement of Pin Fin in Heat Exchanger: A Review 
    Shah, Sagarkumar (Journal of Emerging Technologies and Innovative Research (JETIR), 2016-02)
    Fin is heat-sinks that have extend surface from its base. It enhances the rate of heat transfer. Fin has two types, one is flat, pin. Effect of geometry which includes size, shapes, area, is considered. In arrangement ...

Search DSpace


Advanced Search

Browse

My Account